G PRO® NewPro® Chemist wanted Chemist wanted


NewPro-Nano Hightech Polish

Product Description

NewPro-Nano Hightech Polish is a watery lacquer polish based on chemical nanotechnology.
The polish produces an ultra-thin transparent layer, which offers a long-lasting gloss and protects against environmental influences and stone chipping.

Application Areas / Surfaces

•  Automobiles

•  Mobile Homes

•  Motor Homes/Caravans

•  Motorcycles

•  Ships etc.

Instruction for Application and Use

In order to reach the best result, the following steps are recommended:

Surface Preparation:

The coated surface must be only slightly moist or dry and free from dirt or soiling. If necessary, clean as u sual.

Application:

Shake the liquid product well before using and then spread onto the surface evenly and thoroughly. Apply the product economically! Apply the product to the surface using a towel or sponge and let dry. After drying, the excess of product can be removed by lightly polishing it out.

Caution:

Do not apply product to heated surfaces or to raw synthetic materials such as bumpers, etc! Protect thosr surfaces with tape.

Cleaning the Coated Surface:

The lacquered surface can be easily washed off with a moist towel without applying pressure.

Required Conditions for Use/Application

Drying:

After polishing the gloss it is water repellent.

Important Notice

Although the above mentioned recommendations for application and use of the product are the result of extensive research, it does not relieve the user/consumer of the product of the responsibility to test the application of the product for his/her intended use. We are especially not responsible for the results of any application or use not specifically outlined in written form .

Important Notice

This information serves as a guideline to end users of NewPro-Nano Higtech Polish to the necessary Stepps when applying the product. Users should be made aware of product properties and provide ansers to questions the use might have.

For further instructions, cautions or notice, please refer to the product safety data sheets .

In case of a reprint this information will become invalid.

 

Dated: 15.10.2007


© NewPro 2007