|
|
|
Description
|
|
NewPro-Active Cleaner is an environmentally safe cleaner specially designed for
the thorough cleaning of glass and glazed ceramic as well as the effective and
long-lasting removal of calk and urine stains and even works to fight bacteria. |
|
|
Range of Application and Use
|
|
NewPro-Active Cleaner was specially designed and developed for application to a
wide range and variety of different surfaces such as:
-
Baths
-
Glass
-
Glazed ceramics
-
Nano-coated surfaces
-
Showers and toilets.
For the cleaning of marble and
other acid-sensitive surfaces, NewPro offers an alternative cleaner. |
|
|
Product Characteristics/Features
|
|
NewPro-Active Cleaner exhibits the
following product characteristics:
-
Easy removal of calk and urine stains
-
Environmentally safe
-
Fights bacteria and acts as a deodorant
-
Odorless
-
Very effective and offers the fast and easy removal of dirt and grime
deposits.
|
|
|
Instruction for Application
and Use
|
|
Surface Preparation:
All surfaces should be free of
grease, oil, dirt and dust, dry and sustainable.
-
As usual, thoroughly remove all large dirt and grime and loose particles.
In the event of extreme dirt or
grime, repeat this step until the particles and grime is removed.
|
|
Application:
NewPro-Active Cleaner develops its
full cleaner power when mixed with water. Therefore, NewPro-Active Cleaner
should not be applied undiluted.
-
NewPro-Active Cleaner –Concentrate diluted at a ratio of 3:1 (3 parts cleaner
concentrate and 1 part fresh warm water)
-
Clean surface with non-abrasive combo-sponge (use white side)
-
Allow NewPro-Active Cleaner to actively take effect and after a short time,
rinse off dirt and grime particles with lots of fresh water
-
Remove the remaining moisture and polish the surface dry.
|
|
Warning:
Do not allow NewPro-Active Cleaner
to dry onto the surfaces which are to be cleaned.
|
|
Notice:
NewPro-Active Cleaner covers a
wide range of surfaces. It is, therefore, recommended a test is carried out to
the surface to determine the durability and suitability of the product for its
intended purpose or surface. NewPro-Active Cleaner is not designed for use on
marble and other acid-sensitive surfaces.
|
|
Machine Application:
NewPro-Active Cleaner can be
applied using a standard airless spraying device.
Pay careful attention to the
manufacturer’s operation manual for the spraying device as well as the mixing
instructions. |
|
Mixing
Instructions:
NewPro-Active Cleaner can be diluted at a
ratio of 3:1 (3 parts NewPro-Active Cleaner –Concentrate and 1 part fresh warm
water).
|
|
Use/Product Consumption:
|
|
|
Required Conditions for
Use/Application
|
|
Application and drying can be carried out with a surface and area temperature
between a min. +10°C and max. +30°C. |
|
Required Time to Take Effect:
|
|
Warning:
Do not allow NewPro-Active
Cleaner dry onto the surfaces which are to be cleaned. |
|
Cleaning of Tools:
|
|
|
Delivery Form
|
|
Units per Package:
Further packaging types and
sizes are available upon request. |
|
Color:
|
|
|
Further Instructions
|
|
Transport:
|
|
Storage:
-
At room temperatures in original tightly closed packaging, product can be
stored for a minimum of 6 months
-
Protect against moisture, frost and heat.
|
Disposal:
-
Dispose of product remains at an officially designated disposal site
-
Do not dispose of the product in the public sewage system or domestic drains
-
Only recycle completely
emptied containers.
|
|
|
Work Hygiene
|
|
Before breaks and at the end
working with the product, wash hands thoroughly.
Do not eat, drink or smoke
during use. Avoid eye and skin contact with the product. If necessary, wear
protective clothing.
For further instructions, please
refer to the product data safety sheets for the product. |
|
|
Safety Precautions |
|
Keep away from children.
Keep containers sealed tightly closed. In the event of eye contact, immediately
flush eyes out with lots of clean water. In the event of skin contact, wash skin
thoroughly with water and soap. If necessary, seek medical advice. Do not smoke
during application and use. If swallowed seek immediate medical advice and show
the packaging or product label to the treating physician.
NewPro-Active Cleaner is not
designed for the application on marble and other acid-sensitive surfaces.
For further
instructions, please refer to the product data safety sheets for the product. |
|
|
Safety and Protective Measures
|
|
The general protective measures
for water-soluble materials are to be taken.
The technical advice regarding the
use and application of our products is the result of extensive research and
development as well as many years of experience, according to the best of our
knowledge. The different kinds of requirements of an object, under varying
conditions, make it necessary for the user to check the suitability for the
intended purpose. We reserve the right to effectuate changes, which serve to
affect the technical advance or improvement of our product.
For further instructions, please
refer to the product data safety sheets for the product.
Dated:
04.04.2007 |
|
|
This product description is also available for download in PDF format: (click)
here! |
|
|
|
|
|
|
|