|
|
|
|
|
Description
|
|
NewPro-Surface
Cleaner is specially designed surface cleaner for the beautifying and
environmentally safe cleaning of enamel, glass, glazed ceramics, synthetic
materials, and metals as well as a wide variety of further surfaces without
damaging the surface and can also be used to remove of hard-to-remove grease,
fat, fingerprints and oils. |
|
|
Range of Application and Use |
|
NewPro-Surface Cleaner was specially designed and developed as a beautifying and
environmentally safe cleaner for a wide range and variety of different surfaces
such as:
|
|
For the cleaning of marble and
other acid-sensitive surfaces NewPro offers an alternative remover and cleaner. |
|
|
Product
Characteristics/Features
|
|
NewPro-Surface Cleaner exhibits
the following product characteristics:
-
Easy removal of grease, fat, fingerprints, oils, etc.
-
Easy removal of stubborn stains, dirt and grime
-
Effective and fast removal of dirt and grime deposits
-
Environmentally safe
-
High productivity – concentrate cleaner
-
Odorless.
|
|
|
Instruction for Application
and Use
|
|
Surface Preparation/pre-cleaning:
All surfaces should be free of
grease, oil, dirt and dust, dry and sustainable.
-
As usual, thoroughly remove all large dirt and grime and loose particles.
In the event of extreme dirt or
grime, repeat this step until the particles and grime is removed.
|
|
Application:
NewPro-Surface Cleaner develops
its full cleaner power when mixed with water. Therefore, NewPro-Surface Cleaner
should not be applied undiluted.
-
Dilute NewPro-Surface Cleaner Concentrate at a ratio of 1:500 (10 ml cleaner
concentrate and 5 liters fresh, warm, water) and apply accordingly to the
degree of dirt, soiling and grime
-
Thoroughly clean the surface using a non-abrasive washing towel, cotton towel,
window wiper with non-woven material (fleece) or a sponge
-
Thoroughly rinse off remaining dirt and grime with clean water
-
Remove the remaining moisture and polish the surface dry.
|
|
Warning:
Do not allow NewPro-Surface
Cleaner to dry onto the surfaces which are to be cleaned.
|
|
Notice:
NewPro-Surface Cleaner covers a
wide range of applications. It is, therefore, recommended a test be carried out
to the surface to determine the durability and suitability of the product for
its intended purpose or surface. NewPro-Surface Cleaner is not designed for use on
marble and other acid-sensitive surfaces.
|
|
Machine Application:
NewPro-Surface Cleaner can be
applied using a standard airless spraying device.
Follow the manufacturer’s
instructions and operation manual for the spraying device as well as the mixing
instructions.
|
|
Mixing
Instructions:
NewPro-Surface Cleaner can be diluted at a ratio of 1:500 (10 ml NewPro-Surface
Cleaner Concentrate and 5 liters of fresh warm water).
|
|
Use of Product:
|
|
|
Required Conditions for
Use/Application |
|
Application and drying can be carried out with a surface and area
temperature between a min. +5°C and max. +30°C. |
Required Time to Take Effect:
|
|
Warning:
Do not allow NewPro-Surface Cleaner
dry onto the surfaces which are to be cleaned.
|
|
Cleaning of Tools:
|
|
|
Delivery Form
|
|
Units per Package:
Further packaging types and sizes
are available upon request.
|
|
Color:
|
|
|
Further Instructions
|
|
Transport:
|
|
Storage:
-
At room temperatures in original tightly closed packaging, product can be
stored for a minimum of 6 months
-
Protect against moisture, frost and heat.
|
|
Disposal:
-
Dispose of product remains at an officially designated disposal site
-
Do not dispose of the product in the public sewage system or domestic drains
-
Only recycle completely
emptied containers.
|
|
|
Work Hygiene
|
|
Before breaks and at the end
working with the product, wash hands thoroughly.
Do not eat, drink or smoke during use. Avoid eye and skin contact with the
product. If necessary, wear protective clothing.
For further instructions, please
refer to the product data safety sheets for the product. |
|
|
Safety Precautions
|
|
Keep away from children.
Keep containers sealed tightly closed. In the event of eye contact, immediately
flush eyes out with lots of clean water. In the event of skin contact, wash skin
thoroughly with water and soap. If necessary, seek medical advice. Do not smoke
during application and use. If swallowed seek immediate medical advice and show
the packaging or product label to the treating physician.
NewPro-Surface Cleaner is not
designed for application onto marble and other acid-sensitive surfaces.
Do not allow NewPro-Surface
Cleaner to dry onto the surfaces to be cleaned.
For further
instructions, please refer to the product data safety sheets for the product. |
|
|
Safety and Protective Measures
|
|
The general protective measures
for water-soluble materials are to be taken.
Keep away from children. Keep
containers sealed tightly closed. In the event of eye contact, immediately flush
eyes out with lots of clean water and seek medical advice. In the event of skin
contact, wash skin thoroughly with water and soap. Do not smoke during
application and use. If swallowed seek immediate medical advice and show the
packaging or product label to the treating physician.
The technical advice regarding the
use and application of our products is the result of extensive research and
development as well as many years of experience, according to the best of our
knowledge. The different kinds of requirements of an object, under varying
conditions, make it necessary for the user to check the suitability for the
intended purpose. We reserve the right to effectuate changes, which serve to
affect the technical advance or improvement of our product.
For further instructions, please
refer to the product data safety sheets for the product.
Dated:
04.04.2007 |
|
|
This product description is also available for download in PDF format: (click)
here! |
|
|
|
|
|
|
|
|
