Poster Magic (gloss)

- The Graffiti- and Anti-adhesive Protection against

Wild and Unwanted Fly-Postering on Gloss Surfaces

Product Description     Graffiti Removal with Poster Magic (Instructions for Application)

Poster Magic Graffiti Magic is a one-of-a-kind external total coating, which was specially developed as the best possible protection against graffiti as well as wild and unwanted postering. As a permanent solution, a single coating of Poster Magic allows any kind of graffiti to be repeatedly removed with water without requiring any additional cleaning solutions in 85% of cases. Posters either cannot be stuck to surfaces coated with the Poster Magic protection, or after the adhesive has dried, the posters can be easily peeled off and removed from the surfaces.

Range of Application and Use

Poster Magic is designed for a wide variety of surfaces. The gloss version of Poster Magic is especially effective on surfaces which are difficult to protect, such as plastics or synthetic materials or metals.

Poster Magic was specially developed for protection on the following surfaces:

• Brick

• Concrete

• Masonry

• Metals

• Plaster

• Plastics coated surfaces and synthetics (telephone booths or traffic light control boxes)

• Porous stone

• pretreated and coated or painted surfaces

• Wood.

Poster Magic can also be applied to most externally applied paint coatings. However, we recommend that Poster Magic not be applied to polymer resin paints.

Notice of Caution:

The application of Poster Magic can possibly cause open porous surfaces to darken when painted. In order to minimize this, we recommend that you use our specially designed coating primer Graffiti Magic-Sealer/Primer, which is applied to the surface prior to the final coat of Poster Magic.

Product Characteristics

One complete coating of Poster Magic offers a long-lasting protection against graffiti and rampant and wild unwanted postering.

Poster Magic is available in two variations. Graffiti Magic (matt) and Poster Magic (gloss) are offered in order to minimize the changes in appearance, which through a coating of graffiti protection can occur on the protected surface. Poster Magic is specially designed for synthetic materials and surfaces coated with synthetic materials as well as metals.

Poster Magic can be identified by the following product characteristics:

• Anti-adhesive protection against wild and rampant unwanted postering and algae build-up

• Easy to use

• Highly effective and productive

• Long-lasting protection against graffiti

• Odorless

• Repeated easy removal of graffiti with water.

Technical Data

Ingredients:

• Naphtha (Solvent Naphtha).

For further instructions, please refer to the data safety sheets for Poster Magic (gloss).

Instructions Regarding Use

Surface Preparation:

Poster Magic is a clear and colorless coating. Therefore, before Poster Magic can be used, every trace of graffiti must be removed or painted over. Make sure that the surface to be coated is clean, dry and free from loose substances of materials.

To get rid of hard to remove graffiti or residue without harming the Poster Magic protective coating, we recommend graffiti remover product Blue.

Use/Application:

In order to reach an optimal quality of coating, two coats of Poster Magic is usually applied over Graffiti Magic-Sealer/Primer or a coating of paint. It can, however, also be applied directly over a clean surface or an existing coating on the surface. With very open porous surfaces, 3 coats may be required. Pay attention to the following special instructions.

1. Fully stir Poster Magic prior to application or use.

2. Apply a coating of Poster Magic using a paintbrush or roller or an airless/spray device. The coating should be applied from one side from right to left or vice versa, overlapping thin fluid with low viscosity.

• When spraying be careful not to spray the adjacent surfaces.

3. Subsequent to applying the first coat, let coating completely dry.

4. Subsequent to drying, a second coating can be applied following the instructions in point number 1 above.

• Porous surfaces should be sealed with Graffiti Magic-Sealer/Primer prior to application of Graffiti Magic. This avoids the darkening of the surface and reduces the amount of Graffiti Magic or Poster Magic needed.

Notice:

Poster Magic is a product which dries under humid conditions and immediately begins to dry when it comes into contact with air humidity/moisture. The rate at which it dries depends on the actual temperature and humidity.

Mixing Instructions:

Poster Magic is a solvent naphtha based product and can be applied in a similar way as the usual cleaning based lacquer.

If necessary, dilute Poster Magic with up to 10% solvent naphtha.

Machine Application:

Poster Magic can be applied using a standard Airless/Spray device.

Notice:

Graffiti Magic covers a wide field of application. It is recommended, however, for the user to carry out a test to determine the surface for the suitability and stability for the intended purpose.

Use:

• approximately 100 ml to 125ml per 1 m, or 8-10 m per 1 liter.

This is simply a recommended standard, which in end effect depends on the layer of thickness as well as the absorbency of the surface area structure of the surface.

An exact amount of material needed can only be determined by a sample coating on the surface of the object.

Notice:

Porous surfaces should be sealed with a coating of Graffiti Magic-Sealer/Primer. This avoids the darkening of the surface and reduces the amount of Graffiti Magic or Poster Magic needed.

To get rid of hard to remove graffiti or residue without harming the Poster Magic protective coating, we recommend graffiti remover product Blue.

Required Conditions for Use/Application

Poster Magic is only to be applied in open air or in a well-ventilated room.

Graffiti Magic can only be used and applied when the surface and the air temperature lies between min. + 5° Celsius and max. + 30° Celsius. Graffiti Magic is not to be applied when surface and air temperatures are under + 5° Celsius.

With temperatures over + 25° Celsius Graffiti Magic is not to be applied under direct sunlight.

Drying Times:

• at approximately 20°C, requires approximately 1 to 5 minute drying time.

Poster Magic is a product which dries under humid conditions and immediately begins to dry when it comes into contact with air humidity/moisture. The rate at which it dries depends on the actual temperature and humidity. Therefore, only as much as needed to work between 30 to 60 minutes should be bottled and after that it should be immediately covered.

Notice:

When Poster Magic is mixed with water, it immediately begins to dry. If possible, open containers should be used up on the same day and should no longer be stored.

Cleaning of Tools:

Brushes and rollers should immediately be washed out after the slightest uses with brush cleaner or strong paint thinner. After more extensive use, brushes and brush rolls should be disposed of. Airless-/Spray devices should be thoroughly washed out with petroleum and strong water jet or with high-pressure cleaner.

Delivery Form

Units Per Package:

• 5 Liter packages.

Further package sizes are available upon request.

Color:

• Colorless, in dry condition colorless gloss.

Special Notices

Transport:

• Unlabeled and non-hazardous.

Storage:

• cool, frost-free, in original closed package with a shelf life of approximately 1 year

• keep out of direct sunlight and protect against extreme heat.

Disposal:

• recycle only completely emptied and cleaned containers. Dispose of the remains of the product at the local regulated waste disposal site. Do not dispose of in the sewer system, drainage systems or watercourses because Poster Magic immediately dries upon contact with water.

Work Hygiene

Before breaks and at the end working with the product, wash hands thoroughly.
Do not eat, drink or smoke during use. Avoid eye and skin contact with the product. Wear protective clothing and a breathing apparatus during use or application.

For further instructions or notices, refer to the Poster Magic safety data sheets.

Saftey Precautions

Keep away from children. Keep containers tightly sealed closed. In the event of eye contact, immediately flush eyes out with water. In the event of skin contact, wash skin thoroughly with water and soap. Do not apply solvents or cleaning detergents.
If necessary, seek the advice of a doctor or physician. Do not smoke during application and use. If swallowed seek immediate medical advice and show the packaging or product label to the treating physician.

For further instructions or notices, refer to the Poster Magic safety data sheets.

Protective Measuresn

Keep away from children. Keep containers tightly sealed closed. In the event of eye contact, immediately flush eyes out with water. In the event of skin contact, wash skin thoroughly with water and soap. Do not apply solvents, thinner or cleaning detergents. Do not smoke during application and use. If swallowed seek immediate medical advice and show the packaging or product label to the treating physician.

The technical advice regarding the use and application of our products is the result of extensive research and development as well as many years of experience, and is given to the best of our knowledge. The different kinds of requirements of an object, under varying conditions, make it necessary for the user to check the suitability for the intended purpose. We reserve the right to effectuate changes which serve to affect the technical advance or improvement of our product.

For further instructions or notices, refer to the Poster Magic safety data sheets.

This product is only designed for commercial use!

This product description is also available for download in PDF format: (click) here!

Dated: 25.02.2006

© NewPro 2006