|
NewPro-208 Synthetic Materials Care
Against Graffiti
- As Protective Coating for Synthetic Materials |
|
Product Description
Semi-permanent protective film for smooth synthetic materials against markers,
graffiti and other soiling or stains.
|
|
Range
of Application and Use/Appropriate Surfaces
NewPro-208 Synthetic Materials
Care is used as a semi-permanent protective film against markers, graffiti and
other soiling or stains.
NewPro-208 Synthetic Materials
Care can be used on the following surfaces:
-
PE
-
PMMA (Plexiglass)
-
PVC.
|
|
Product Characteristics/Features
NewPro-208 Synthetic Materials Care is a protective sealant
based on water vapor permeable vinyl. With treatment using NewPro-208 Synthetic
Materials Care dirt, stains, soiling and markings can no longer permeate the
protected surfaces so intensively because they remain on the sacrificial surface
coating. Dirt, soiling, stains and markings can be easily washed off with water
and mild cleaning solvents.
The NewPro-208 Synthetic
Materials Care protective coating is barely visible. |
|
Instruction for Application and Use
Surface Preparation:
All surfaces
must be clean and dry.
Application:
NewPro-208
Synthetic Materials Care can be applied to all appropriate surfaces using an
airless spraying device or on smaller surface areas using a pump-spraying
device. After 60 minutes, at an area temperature of +20°C, the surface coated
with NewPro-208 Synthetic Materials Care is ready for use. The temperature
during application (temperature of the surface which is to be coated) is not to
exceed +5 °C.
Machine
Application:
NewPro-208
Synthetic Materials Care can be applied using a standard airless spraying device.
Use:
This here is
merely a standard value, which, in practice, can vary depending on the
absorbency of the surface.
An exact
requirement of materials should be determined through the use of a test to the
surface of the object.
|
|
Required Conditions for Use/Application
The application and drying can be effectuated
with a surface and area temperature between a min. +5°C and max. +30°C.
Do not apply the product at temperatures above
+25°C under direct sunlight.
Drying Times:
Depending on temperature and
relative humidity.
Cleaning of Tools:
|
|
Delivery Form
Units Per Package:
Color:
|
|
Further Instructions
Transport:
Storage:
|
|
Work Hygiene
Before breaks
and at the end working with the product, wash hands thoroughly.
Do not eat,
drink or smoke during use. Avoid eye and skin contact with the product.
For further instructions, please
refer to the product data safety sheets for the product. |
Safety Precautions
Keep away from children.
Keep containers sealed tightly closed. In the event of eye contact, immediately
flush eyes out with lots of clean water. In the event of skin contact, wash skin
thoroughly with water and soap. Do not smoke during application and use. If
swallowed seek immediate medical advice and show the packaging or product label
to the treating physician.
For further instructions, please refer to the
product data safety sheets for the product. |
|
Safety and Protective
Measures
The general safety precautions for
water solvent materials are to be considered
The technical
advice regarding the use and application of our products is the result of
extensive research and development as well as many years of experience,
according to the best of our knowledge. The different kinds of requirements of
an object,
under varying conditions, make it necessary for the user to check the
suitability for the intended purpose. We reserve the right to effectuate
changes, which serve to affect the technical advance or improvement of our
product.
For further instructions, please refer to the product data safety sheets for the
product.
This
product is designed for commercial use only!
|
|
This product data sheet can also be downloaded in PDF-Format:
hier!
Dated:
21.06.2006 |
© NewPro 2006 |