|
Gum Magic-Chewing Gum and Adhesive
and Label Remover |
|
Product Discription
A new chewing
gum coating and adhesive and label remover for gentle surface utilization.
Areas of Application
Gum Magic-Chewing Gum and Adhesive
and Label Remover dissolves chewing gum and adhesives and soddens almost all
labels. The Remover is suitable for surfaces made of metal, minerals as well as
most synthetic materials.
|
|
Product Specification
Gum Magic-Chewing Gum and Adhesive and Label Remover is
based on aromatic hydrocarbons.
Further qualities are:
|
|
Technical Characteristics
Binding agent basis:
Adhesive Agent:
Please check the Gum Magic-Chewing
Gum and Adhesive and Label Remover safety data sheet.
|
|
Instructions Regarding Use
Workmanship:
Apply Gum
Magic-Chewing
Gum and Adhesive and Label Remover on soiled surface with a brush. After a
certain time the dissolved dirt parts can be removed with tissue or rags. (Use
power steam water only outside).
Apply Gum Magic-Chewing Gum and
Adhesive and Label Remover from top down up to the saturation of the subsoil
with brush, airless spraying tools or streaming onto the subsoil put on.
The Remover covers a wide
application area. It is strongly recommended to test the
Remover at a controlled area for reliability
Attention:
Gum Magic-Chewing Gum and Adhesive
and Label Remover must not dry on the surface!
Mechanical
workmanship:
Gum Magic-Chewing Gum and Adhesive
and Label Remover can be processed with usual airless spraying tools.
Use:
This is only
an approximate figure because usage depends on the soiled layer’s thickness and
varies depending on the surface texture.
The exact
material usage needs to be determined on site.
|
|
Required Conditions for Use
The remover
should not be diluted for rough dirt. The surface and environment temperature
should be between at least + 5° Celsius and max. + 30° Celsius.
The residence time at + 20°
Celsius will be between 5 and 10 minutes depending on the thickness of the
soiled layer.
Cleaning of the tools:
|
|
Form
of Delivery
Units Per Package:
Color:
|
|
Special Notes
Transport:
Storage:
-
Into
the mixed state cool last at (approx. 5 to 15°C) and frost protected storage
approx. six days
-
approx. 1 year lastingly if stored, frost protected, in originally shut
wrapping.
|
|
Work
Hygiene
Before breaks
and at the end working with the product, wash hands thoroughly.
Do not eat, drink or smoke during use. Avoid eye and skin contact with the
product. Wear protective clothing and a breathing apparatus during use or
application.
For further instructions or
notices, refer to the safety data sheets
|
|
Safety Precautions
If moisture penetration and/or a
washing out of the freshly applied Gum Magic-Chewing Gum and Adhesive and Label
Remover should occur, carry out a second impregnation after drying. Remove clean
items impurities through GUM Magic-Chewing Gum and Adhesive and Label Remover on
not mineral, for example spouts, timber, windows, dense burned clinkers and
glazed piece of pottery, with water.. |
|
Safety Precautions
Attention is to be paid to the
general protective precautionary features for water-soluble materials.
Gum Magic-Chewing Gum and Adhesive
and Label Remover must not dry on the surface.
The utilization advice of
application of our products is based on extensive development works as well as
long-standing experiences and according to best knowledge. The most various
objects have different conditions, however, a necessitate for the respective
purpose the user. Changes, due to the technical headway or the improvement of
our products are possible.
Keep away from children. Keep containers sealed
tightly closed. In the event of eye contact, immediately flush eyes out with
water. In the event of skin contact, wash skin thoroughly with water and soap.
Do not apply solvents or cleaning detergents.
If necessary, seek the advice of a doctor or physician. Do not smoke during
application and use. If swallowed seek immediate medical advice and show the
packaging or product label to the treating physician.
For further instructions or
notices, refer to the safety data sheets |
|
Protective Measures
The technical advice regarding the
use and application of our products is the result of extensive research and
development as well as many years of experience, and is given to the best of our
knowledge. The different kinds of requirements of an object, under varying
conditions, make it necessary for the user to check the suitability for the
intended purpose. We reserve the right to effectuate changes which serve to
affect the technical advance or improvement of our product.
For further instructions or
notices, refer to the safety data sheets
|
|
This product description is also available for download in PDF format: (click)
here!
Dated:
24.02.2006 |
© NewPro 2006 |