|
Instructions Regarding Use/Application
Mixing
Instructions:
NewPro-Tensid
TXB Floor Cleaner, depending upon the soiling, can be mixed with water at a
ratio up to 1:15.
Application:
NewPro-Tensid
TXB Floor Cleaner can be applied to the soiled surfaces with the specified
dilution using a spray or airless spraying device. After the time required to
take effect, the applied solvent protective part can be washed off with warm
water.
Machine
Application:
NewPro-Tensid
TXB Floor Cleaner can be applied using a standard spray/airless-spraying device.
Caution:
Do not allow NewPro-Tensid TXB
Floor Cleaner to dry on the cleaned surfaces.
Notice:
NewPro-Tensid TXB Floor Cleaner
can be applied to a wide range of surfaces. It is, however, recommended that a
test be applied to the surface to determine the durability.
Use:
This is simply
an estimation, which can vary depending upon the layer thickness, the type and
degree of soiling and the structure of the surface.
An exact
amount of material required should be determined by a test on the surface of the
object.
|