|
NewPro-Oxy Clean Special Cleaner |
|
|
Product Discription
|
|
NewPro-Oxy Clean Special Cleaner is an environmentally safe cleaner for the
thorough removal of rust and calk deposits on a wide range of surfaces. |
|
|
Range of Application and Use /Appropriate Surfaces
|
|
NewPro-Oxy Clean Special Cleaner
can be applied as an environmentally safe cleaner for thorough removal of rust
and calk deposits to the following surfaces:
|
|
|
Product Characteristics
|
|
NewPro-Oxy Clean Special Cleaner offers the following properites:
|
|
|
Instruction for Application and Use
|
|
Mixing Instructions:
NewPro-Oxy
Clean Special Cleaner can be diluted with water at a ratio between 1:1 and 1:4,
depending on the degree of dirt or contamination.
|
|
Application:
Apply
NewPro-Oxy Clean Special Cleaner directly to the dirt and grime using a
brush, allowing adequate time for the cleaner to take effect. After the
cleaner has taken effect, briefly rub off the dirt and grime using a brush
and rinse off the dirt and grime with clean water.
See further
instruction under the next point, Required Conditions for Application.
|
|
Machine Application:
For larger
surface areas, NewPro-Oxy Clean Special Cleaner can be applied using a standard
spray/airless device. Please read the manufacturer’s instructions carefully.
|
|
Notice:
Do not allow NewPro-Oxy Clean
Special Cleaner to dry onto the surface.
|
|
Product Use/Consumption:
This is
merely a standard value, which can vary depending upon the properties and
conditions of the actual surface and the degree of dirt and grime.
An exact
amount of required material for the intened purpose is to be determined with a
test application to the surface of the object. |
|
|
Required Conditions for Use/Application |
|
The
application and drying of the product can be effectuated with a surface and area
temperature between a min. +5°C and max. +30°C.
Do not apply
the material at temperatures above 25°C under direct sunlight.
|
Required Time to Take Effect:
Depending upon the degree and
thickness of the layer of dirt or soiling to be removed.
|
|
Caution:
Do not allow
NewPro-Oxy Clean Special Cleaner to dry onto the surface. |
|
Cleaning of Tools:
|
|
|
Delivery Form
|
|
Units Per Package:
|
|
Color:
|
|
|
Special Instructions
|
Transport:
|
Storage:
|
|
|
Work Hygiene
|
|
Before
breaks and at the end working with the product, wash hands thoroughly.
Do not eat, drink or smoke during use. Avoid eye and skin contact with the
product. If necessary, wear protective clothing.
For further instructions, please
refer to the product safety data sheets for this product. |
|
|
Safety Precautions
|
|
Keep
away from children. Keep containers sealed tightly closed. In the event of eye
contact, immediately flush eyes out with water. In the event of skin contact,
wash skin thoroughly with water and soap. If necessary, seek medical advice. Do
not smoke during application and use. If swallowed seek immediate medical advice
and show the packaging or product label to the treating physician.
For further
instructions, please refer to the product safety data sheets for this product. |
|
|
Safety and Protective Measures |
|
The
general safety precautions for water solvent materials are to be considered.
The technical
advice regarding the use and application of our products is the result of
extensive research and development as well as many years of experience,
according to the best of our knowledge. The different kinds of requirements of
an object, under varying conditions, make it necessary for the user to check the
suitability for the intended purpose. We reserve the right to effectuate
changes, which serve to affect the technical advance or improvement of our
product.
For further instructions, please
refer to the product safety data sheets for this product.
The product is only designed
for commercial use and application! |
|
|
This product description is also available for download in PDF format: (click)
here!
Dated:
07.01.2007 |
|
|
|
|
|
|
|
