NewPro Nano Wood - the universal protection for untreated wood
Description
NewPro-Nano
Wood is an aqueous inorganic-organic coating material for
untreated wood based on chemical nanotechnology. Self-organizing
anti-adhesive components offer untreated wood surfaces an invisible
layer with hydrophobic and oleophobic (water, grease and oil
repellent) characteristics.
Range of Application and Use
NewPro-Nano
Wood has a wide variety of applications around the house and garden
on many untreated open porous, absorbent wood surfaces, such as:
-
Untreated wood, such as birch, beech, oak, pine, etc.
-
Garden furniture (tropical and teak woods)
-
Garden houses, sheds
-
Wood fences
-
Plywood.
NewPro-Nano
Wood can also be applied to many other surfaces such as cork.
Product Characteristics
NewPro-Nano
Wood offers protected surfaces grease, oil, dirt, grime and water
repellent characteristics and is distinguished by its easy to clean
properties.
Further
characteristics include:
-
Breathing activity remains in tact.
-
Prevents weathering or decomposition of wood surfaces
-
Direct applicability
-
Removes the fertile foundation for the growth of greens such as algae and moss.
-
Easy to apply
-
Nanoformed open-porous surfaces
-
Fire damp resistant
-
Fast drying
-
Long lasting protection of surfaces against grease, oil, dirt, grime, water, etc.
-
UV-stabile
-
Dirt, grime, grease oil and soiling easy to remove with water spray.
-
Weather resistant.
Instructions Regarding Use/Application
Surface
preparation/pre-cleaning:
All
surfaces should be grease, oil and dust particle free, dry and
sustainable.
-
As usual, large and rough dirt or soiling and loose particles should be thoroughly removed. For extreme soiling, repeat the steps above.
-
Let the surface completely dry before the application of NewPro-Nano Wood sealant and do not touch with fingers.
Surface
Coating/Application:
The
surface to be coated must be completely cleaned and grease free prior
to the application.
-
Spray NewPro-Nano Wood thickly onto the surface and evenly spread with a brush or roller.
-
Let NewPro-Nano Wood dry until fluid or product remains are no longer visible.
Notice:
NewPro-Nano
Wood covers a wide range of applications. For this reason, we
recommend that a test be applied to the surface in order to determine
the suitability of the product for its intended purpose. The coating
should be immediately applied after pre-cleaning and should no longer
be touched.
Improvement
and New Surface Coatings:
By
the abatement of the protective characteristics, repeat the steps
described above.
Cleaning
of the coated surface:
NewPro-Nano Wood is a
permanent protective system. Soiling, dirt and grime, and dry residue
can be removed with a moist towel.
Caution:
NewPro-Nano
Wood and Stone is not to be applied together with chloric cleaning
solutions. There is the possibility of the formation of poisonous
vapors.
Mixing
Instructions:
NewPro-Nano
Wood can
be directly applied and is not mixable with water or other
substances. A mixture with foreign substances can have a negative
effect on the characteristics of the product as well as the
durability or lifespan of the product and the coated surface.
Use:
-
Approximately 100 - 200 ml/m.
This
is simply an estimation, which can vary depending upon the absorbency
of the surface.
An
exact amount of material required should be determined by a test on
the intended surface.
Required Conditions for Use/Application
The
application and drying requires a surface and area temperature
between min. +5 °C and max. + 30 °C. NewPro-Nano
Wood and Stone is not to be applied under direct sunlight at
temperatures over 25
°C. Do not apply at temperatures under +
5 ºC.
During
application and drying times, protect the surface coating from rain.
Caution:
NewPro-Nano
Wood is not to be applied to surfaces which can reach temperatures
over 180°C, otherwise the coating surface layer can become
brittle and damaged.
Drying
Times:
-
+10 °C approximately 6 h
-
+20 °C approximately 4 h
-
+30 °C approximately 3 h.
The
complete protective characteristics of NewPro-Nano Wood occur after
24 hours of drying, depending upon the temperature and the relative
humidity.
Delivery Form
Units
Per Package:
-
100 ml Nanofluid (sealant).
Further
types of packaging and sizes are available upon request.
Color
-
Colorless, in a dry condition colorless.
Special Instructions
Transport:
-
Unlabeled and non-hazardous.
Storage:
-
At room temperature minimum of 6 months when stored in closed original packaging
-
Protect against moisture, frost and heat.
Disposal:
-
Only recycle completely emptied containers or packaging.
-
Only dispose of the remainder of the product at an officially designated disposal site
-
Do not dispose of the product in the public sewage or drainage system.
Work Hygiene
Before
breaks and at the end working with the product, wash hands
thoroughly. Do not eat, drink or smoke during use. Avoid eye and
skin contact with the product. If
necessary, wear protective clothing.
For
further instructions, please refer to the product safety data sheets
for this product.
Safety Precautions
Keep
away from children. Keep containers sealed tightly closed. In the
event of eye contact, immediately flush eyes out with water. In the
event of skin contact, wash skin thoroughly with water and soap. If
necessary, seek medical advice. Do not smoke during application and
use. If swallowed seek immediate medical advice and show the
packaging or product label to the treating physician.
NewPro-Nano
Wood is not to be applied to surfaces which can reach temperatures
over 180°C, otherwise the coating surface layer can become
brittle and damaged. NewPro-Nano
Wood is
not to be applied together with chloric cleaning solutions. There is
the possibility of the formation of poisonous vapors.
For
further instructions, please refer to the product safety data sheets
for this product.
Safety and Protective Measures
The
general safety precautions for water solvent materials are to be
considered.
Keep
away from children. Keep containers sealed tightly closed. In the
event of eye contact, immediately flush eyes out with water. In the
event of skin contact, wash skin thoroughly with water and soap and
seek medical advice. Do not smoke during application and use. If
swallowed seek immediate medical advice and show the packaging or
product label to the treating physician.
The
technical advice regarding the use and application of our products is
the result of extensive research and development as well as many
years of experience, according to the best of our knowledge. The
different kinds of requirements of an object, under varying
conditions, make it necessary for the user to check the suitability
for the intended purpose. We reserve the right to effectuate
changes, which serve to affect the technical advance or improvement
of our product.
For
further instructions, please refer to the product safety data sheets
for this product.
